IAR Embedded Workbench for ARM - patch for ST device support in ST-LINK, I-jet and J-Link

IAR Embedded Workbench for ARM - patch for ST device support in ST-LINK, I-jet, and J-Link

Created: 2017-01-10 [ILOF]

Version number 7.80.4.12176

1. Purpose

You should use this patch is you are using an ST device with ST-LINK, I-jet, or J-Link and get the following error message:
Driver: Fatal Error: The selected device does not match the target device. Session aborted!
[EW26369]

2. Files included in the patch

File names are given relative to the root directory \Embedded Workbench 7.5\

arm\bin\armJET.dll
arm\bin\armJET.ENU.dll
arm\bin\armJET.JPN.dll
arm\bin\armJLINK2.dll
arm\bin\armJLINK2.ENU.dll
arm\bin\armJLINK2.JPN.dll
arm\bin\armSTLINK2.dll
arm\bin\armSTLINK2.ENU.dll
arm\bin\armSTLINK2.JPN.dll

3. Installing the patch

This patch requires that version 7.80.3 of IAR Embedded Workbench for ARM is installed.

Exit IAR Embedded Workbench.
Unzip the downloaded archive in the directory \Embedded Workbench 7.5